MOTOR BRAKE FLUID DOT 5.1

for hydraulic brake and clutch circuits, long-lasting fluid, 100% synthetic, DOT 5.1 without silicone base, applications for all hydraulic brake and clutch systems that meet or recommend the specifications DOT 5.1, DOT 4, and DOT 3 from manufacturers. Specially designed fluid for anti-lock brake systems (ABS), performance standards FMVSS 116 DOT 3, 116 DOT 4, 116 DOT 51, non-silicone base, ISO 4925-51, 4, 3, and SAE J1703. Long-lasting fluid with a very high wet boiling point of 185°C (365°F), superior to other fluids: DOT 4 at 155°C (311°F) and DOT 3 at 140°C (284°F). Allows the use of long-lasting products. This type of brake fluids DOT 3, DOT 4, and DOT 5.1 have the property of absorbing moisture from the air, decreasing the boiling point, and therefore the braking safety. The wet boiling point is representative of the state of the fluid after one year of use. Especially suited for anti-lock brake systems (ABS), with a viscosity of 820 cP at 40°C, lower than conventional fluids: DOT 4 up to 1800 cP and DOT 3 up to 1500 cP, allowing the fluid to flow easily between the microvalves of the anti-lock system without hindering their movement. Neutral behavior with the seals used in braking systems, anti-corrosion. Recommendations: mixable with products DOT 3, DOT 4, and DOT 5.1 without silicone base; do not mix with mineral-based LHM fluids and silicone DOT 5 silicone base. Store the product in its well-sealed and dry container. Aggressive chemical product for hands, paints, and varnishes. In case of skin contact, wash with plenty of water. Fluid change every 12 to 24 months according to manufacturer recommendations. Technical characteristics: visual color yellow, viscosity at 100°C (212°F) 21 mm²/s, viscosity at 40°C (104°F) 8200 mm²/s, dry boiling point 269°C (516°F), wet boiling point 187°C (369°F).