BAR'S RADIATOR STOP LEAK

The cooling system of your vehicle plays a crucial role in its overall operation. Leaks in the gaskets and seals reduce the capacity and functionality of the cooling system, causing the engine to overheat and increasing the risk of further damage. Additionally, cavitation, or the formation of cavities in the coolant as it passes through the water pump, causes intense micro-explosions that will eventually damage the water pump impellers, affecting the flow of coolant.

Bar's Radiator Stop Leak is specially designed to seal small leaks and drips in the cooling system and reduce or eliminate cavitation. Bar's Radiator Stop Leak works in leaking plastic, aluminum, and metal radiators, heater cores, blocks, head gaskets, gaskets, and freeze plugs. Furthermore, the Rhizex particles will break down the low-pressure cavities caused by cavitation and reduce or eliminate these internal micro-explosions.

Instructions:
Shake well and pour the entire contents into the radiator (not into the overflow tank) after the engine has cooled down. Replace the radiator cap and drive or run the engine for at least 15 minutes. If leaks persist, use a second application. Use one bottle for 4-cylinder engines and two bottles for 6 and 8-cylinder engines. For best results, use Bar's Nural or Bar's 10 Minute Flush to clean the cooling system of dirty radiators. NOTE: Mechanical attention may be needed if leaks continue after treatment.

Benefits:
Seals leaks throughout the cooling system.
Helps keep the cooling system clean.
Reduces or eliminates cavitation damage.

Warnings:
Always exercise caution when working near the engine or radiator. Be careful when removing the radiator cap. DANGER: Opening the cooling system while the engine is hot or running can cause severe burns.