SEALANT COOLING SYSTEM

The cooling system of your vehicle plays a crucial role in its overall functioning. Leaks in seals and gaskets reduce the capacity and functionality of the cooling system, causing the engine to overheat and increasing the likelihood of further damage. Additionally, cavitation, the formation of cavities in the coolant as it passes through the water pump, causes intense micro-explosions that can damage the water pump impellers over time, affecting the flow of coolant. Description: Original Bar's radiator stop leak is specially designed to seal small leaks and drips in the cooling system, reduce or eliminate cavitation, and lubricate the components of the cooling system. Original Bar's radiator stop leak works on leaks in plastic, aluminum, and metal radiators, heater cores, engine blocks, head gaskets, and freeze plugs. Moreover, the Rhizex particles will break the low-pressure cavities caused by cavitation and reduce or eliminate these internal micro-explosions. Instructions: Shake well and pour the entire contents into the radiator, not into the overflow tank. After the engine cools, replace the radiator cap and drive or run the engine for at least 15 minutes. If leaks persist, use a second application. Use one can for 4-cylinder engines and two bottles for 6 and 8-cylinder engines for best results. Use Nural Bar's radiator cleaner or Bar's 10 Minute Flush to clean the cooling system of dirty radiators. Note: Mechanical attention may be necessary if leaks continue after treatment. Benefits: Seals leaks throughout the cooling system, helps keep the cooling system clean, reduces or eliminates cavitation damage, lubricates the components of the cooling system. Warnings: Always exercise caution when working near an engine or radiator. Be careful when removing the radiator cap. Danger: Opening the cooling system with the engine hot or running can cause severe burns.