RADIATOR LEAK SEALANT MOTUL

Radiator leak sealant for the cooling system. Sealing additive to be added to cooling systems. Suitable for all liquid-cooled cooling systems. MOTUL RADIATOR LEAK SEALANT is designed for use in radiators and closed cooling circuits (with expansion tank) of all diesel and gasoline engines, whether naturally aspirated or turbocharged, with or without a catalyst, and with any type of fuel. MOTUL RADIATOR LEAK SEALANT effectively seals small pores and leaks of coolant that could cause significant problems. This product acts quickly and efficiently in all types of closed, liquid-cooled cooling systems. MOTUL RADIATOR LEAK SEALANT can be used to seal water radiators and heat exchangers, leaks in water pumps, valves, loose connections, and cracked coolant hoses, without causing blockages in the cooling system. Recommended for use in passenger cars and commercial vehicles, as well as in industrial heat exchangers. It can be used as a preventive treatment or immediate action. Compatible with all types of coolants (non-organic, hybrid, Lobrid, and OAT). Provides perfect lubrication during the sealing process of the coolant circuit. FEATURES MOTUL RADIATOR LEAK SEALANT, added to the engine's cooling circuit, allows: - To seal small pores and significant leaks without blocking the cooling system. - To improve the performance of valves, thermostats, and water pumps. - To enhance engine temperature control. RECOMMENDATIONS Check the coolant level. Add MOTUL RADIATOR LEAK SEALANT to the coolant in the expansion tank of the cooling system while hot. Set all heater controls to the hot position. Let the engine idle for about 10 minutes. Recheck the coolant level and verify if the sealing has been applied effectively. Caution: when opening the cap of the expansion tank, do so slowly and carefully, as it is a pressurized and hot system, posing a burn risk. A dose of 300 ml is sufficient for cooling systems with a capacity of up to 12 liters. Never exceed the recommended ratio.